If you have a broken garage door spring, you’ll want to call a professional right away. This is because broken springs can cause a lot of damage. They can cause the door to malfunction, making it difficult for you to open and close the door, and can even trap you inside the garage. Plus, they’re incredibly dangerous to replace yourself. Not only are you putting your safety at risk, but you also risk damaging the spring.
Broken garage door springs are common culprits of cars getting stuck in the garage. When your spring breaks, the weight of the door becomes unbalanced, and it will no longer be able to counteract gravity. The top panel will start bending, and the door may go off track or even tilt. It will also put a tremendous amount of pressure on your suspension system.
Fortunately, there are a number of ways to spot a broken spring. First, you can look for a gap in the spring. You should also check for wear. If there’s visible wear on the spring, or if the top or bottom panel is bending, it could be a sign of a broken spring. Another indicator of a broken spring is when the coil has scraped or squeaked. These can occur when the coil is damaged, or when you’re driving over rough terrain.
Then, you can take your car out for a drive. If the car is bouncing and swaying, it’s a sign that the coil spring has been damaged. On the other hand, if it’s sagging or the vehicle is falling, it’s a sign that your springs are overloaded. In this case, you should consider replacing both springs.
A good place to begin is by calling a company that specializes in broken spring replacement. Some companies, such as Door Pros, offer services in Marin County, San Francisco, and Sacramento. Their technicians know how to replace broken springs and can get your door back in working order in a matter of hours.
Regardless of which company you choose to work with, you should make sure that they have the right tools and experience to do the job properly. Without these, you can seriously hurt yourself. There are a number of dangerous tasks involved, including lifting a heavy door, and if you don’t know what you’re doing, you could get badly injured.
If you do have to replace a spring on your own, make sure you do it correctly. Springs come in a variety of sizes, and you need to be certain that you’re using the correct one. Also, make sure to measure the length of the spring, the wire size, and the winding orientation. Once you’ve determined the type of spring, it’s time to start removing the hardware.
You should also make sure that you use the proper lubricant on the springs. Lubricant can be purchased for about $5-6, but it’s recommended that you use a lubricant designed specifically for the coil springs.
